Precautions When
Using Marine Gangway
Preparations that
should be done before use:
1. Ensure that all
rivets, bolts, nuts and moving parts are tightly connected, the ladder columns
and steps are firm and reliable, and the extension circlips and hinges are in
good working condition.
2. The gangway should
be kept clean and free of slippery substances such as grease, oil, wet paint,
mud, snow, etc.
3. The operator’s
shoes are kept clean, and leather-soled shoes are prohibited.
Note:
1. It is forbidden to
use the gangway when you are tired, take drugs, drink alcohol or have a
physical disability.
2. The gangway should
be placed on a firm and stable ground, and it is forbidden to place it on ice,
snow or slippery ground without anti-skid and fixed equipment.
3. It is forbidden to
exceed the marked maximum load-bearing quality during operation.
4. Prohibit the use
of the gangway in strong winds.
5. The metal gangway
is conductive, please avoid close to live places
6. When climbing,
face the gangway, hold both hands firmly, and keep the center of gravity in the
center of the ladder.
7. When working, do
not stand on the steps within 1 meter from the top of the gangway, always keep
the safety height of 1 meter, let alone climb the highest support point at the
top.
8. Keep your hands
above the top of your head so as not to lose your balance and be in danger when
working.
9. It is forbidden to
cross directly from one side of the gangway to the other.
10. Ambient
temperature:-30 ℃ ~ + 60 ℃.
11. When installing the
connection point, it should rotate flexibly and there should be no block.
12.The selection size should be reasonable, the
force size should be appropriate, and the stroke size of the piston rod should
have a margin of 10 mm.
