Marine Strainer

Marine strainer include water strainer(S type water strainer, LA, LB, LC, LD type water strainer,Y type water strainer etc), oil strainer(U type duplex oil strainer,H type duplex oil strainer simplex oil strainer etc)

1.Design standard:CB/T497-94. 2.End standard:GB569/GB2501. 3.End type:Flange. 4.PN:0.1Mpa. 5.DN:40mm-350mm.

1.Design standard:CB/T497-94. 2.End standard:GB569/GB2501. 3.End type:Flange. 4.PN:0.1Mpa. 5.DN:40mm-350mm.

Marine Low Pressure Oil Strainer CB/T425-1994: 1.Design standard:CB/T425-1994. 2.End standard:GB/T2501&GB/T569. 3.End type:Flange. 4.PN:0.4Mpa. 5.DN:20mm-100mm.

Marine Simplex Oil Strainer JIS F7209: 1. LA, LB strainer available. 2. Material: (1). Body: FC200 (2). Bonnet: FC200 (3). Cover push: FCD400

Marine Mud Box JIS F7203 : 1. L type, S type mud box availalbe. 2. Design standard: JIS F 7203-1996. 3. Test: JIS F 7200-1996. 4.PN:5k/10k.

(1). Material: bronze (2). Design standard: JIS F7220Q-1996 (3). Test standard: JIS 7400-1996 (4). Hydraulic test pressure: Body—1.05Mpa (5). Flange size as per JIS B2220-5K (6). 10K,20K also available.

1. Marine can water filter JIS F 7121 5K, S type, LA type, LB type available. 2. Main material: (1). Body: cast iron(FC200) (2). Bonnet: cast iron(FC200) (3). Strainer: stainless steel(SUS304)

1.Test standard:JISF7400. 2.End standard:JISB2220. 3.End type:Flange. 4.PN:5k. 5.DN:25mm-100mm.

1.Nominal diameter: 20A~50A. 2.Nominal pressure:5K,10K. 3.Applicable temperature: ≤220º C. 4.Valve body material:Cast Iron. 5.Applicable media: Gas,Air. 6.Drive mode: Manual. 7.Manufacturing standards: JIS.