Aluminum Alloy Air Vent Head
It is used for air piping system to balance the pressure and prevent from mosquitoes, honeybees, frame, rain, sea water. The features are less weight and better ventilation.
C, CS Type Cast Iron Air Vent Head
Cast Steel Air Vent Head can through inhalation and breathing to let the air pressure in the cabin close to the atmospheric pressure,so that the pressure is kept within the design pressure of the tank. And…
Ductile Iron Air Vent Head
Ventilation and Pressure Relief: Similar to other air vent heads, the primary function is to provide ventilation and pressure relief in enclosed spaces on ships or industrial settings. Corrosion Resistance: Ductile iron is chosen for its…
DN200 Marine Air Vant Head
It is used for air piping system to balance the pressure and prevent from mosquitoes, honeybees, frame, rain, sea water. The features are less weight and better ventilation. Air Vent Head It is used for air…
Marine Expansion Scupper Plug
The marine deck drain hole copper plug (DFKS) is mainly used to plug the deck drain hole. The main principle is to use the bolt to compress the rubber to expand so as to plug the…
CBT254-1977 Ship Bottom Plug
Supply bottom drain plug CBT254BW CBT25b4W bottom drain plug, which is mainly composed of three parts: cock, base and padding. It is mainly used for water tank and oil tank. There are two types: type A…
JIS F3003 Bonnet Measurement
Design Standard: JIS F3003-1977 Material: Bronze and Brass Size: DN25, DN32,DN40,DN50,DN65,DN80
Self-closing Gate Valve for Sounding Pipe
Alias: gate type sounding self closing valveAlias: DN40-80Nominal pressure: 0.15MpaMaterial: BronzeSupply mode: processing and customizationModel: CMB1065-82 marine gate type sounding self closing valve
CBM1114-82 International Shore Connection
This type of oil sewage international shore connection and domestic sewage international shore connection are mainly suitable for the use of ship oil sewage and domestic sewage pipelines. One end is a plane flange, and the…
Marine Expansion Joint
1. Standard: CB1153-93 2. Connections End: Flange 3. Nominal Diameter: DN50 – DN500 4. Nominal Pressure: 0.4 ~ 1.6 Mpa 5. Working Temperature: ≤250℃
Marine Suction Port
DN: 80 to 500; Pattern: B, BS; Materials of main Parts: Body: Carbon Steel and Cast Iron; Flange: Carbon Steel and Cast Iron; Support: Carbon Steel and Cast Iron; Pipe: 10 Seamless Steel Pipe;
T type Marine Fluid Watching Machine
Body: Cast Iron; Transparent board: Ordinary glass; Transparent Pipe: Plexiglass; Cover: Cast tin bronze; Cover Board: Carbon steel.
JIS F7234 Marine Sight Glass
Body: Cast Iron; Transparent board: Ordinary glass; Transparent Pipe: Plexiglass; Cover: Cast tin bronze; Cover Board: Carbon steel.
Marine Deck Surface Valve CBT4233-2013
The marine deck surface valve comprises a connecting bottom plate, a support and a valve rod. The connecting bottom plate and the support are fastened by * nuts and stud bolts, and the stud bolts run…
Stainless Steel Drive Control Head
Model: CB / T3791-1999 small shaft transmission device elementExecutive standard: special standard of National Technical Committee for ship standardizationProduct model on this page: A2 type handwheel drive control head with travel indicatorThis standard product is applicable…