Welding Wire

Used for welding 1%Cr, 0.5%Mo low alloy steel that working temperature is below 510 ℃,

Used for welding 1%Cr, 0.5%Mo low alloy steel that working temperature is below 510 ℃.

Used for welding boiler pipelines that working temperature is below 510 ℃ (15Mo)

This wire is used for welding boiler pipelines that working temperature is below 510 ℃

Used for welding boiler pipelines, high pressure vessels, petroleum thermal cracking equipment, and 30CrMnSi Cast steel as well.

suitable for welding structures made by atmospheric corrosion and infecion resistance steels,e.g.ASTM A424 & A588 steels.

suitable for welding structures made by atmospheric corrosion and infecion resistance steels.

suitable for welding structures made by atmospheric corrosion and infecion resistance steels,e.g.ASTM A424 & A588 steels.

suitable for welding structures of skyscrapers and jumbo public buildings which fabricated by fire resisting and aimospheric corrosion

suitable for welding structures made by atmospheric corrosion and infecion resistance steels,e.g.ASTM A424 & A588 steels.

It is a kind of welding wire with appropriate manganese and silicon content. It matches with low-manganese and low-silicon type welding flux. It is not sensitive to the rust on the base metal. It has excellent…

Introduction:It is a kind of high-manganese type welding wire. It matches with low-manganese and low-silicon type welding flux. It is not sensitive to the rust on the base metal. It has excellent bead molding and slag…

Introduction:It is a kind of medium-manganese and medium-silicon type welding wire. It matches with medium-manganese and medium-silicon type welding flux. It is not sensitive to the rust on the base metal. It has excellent bead molding…

Introduction:It is a kind of low-manganese and low-silicon type welding wire. It matches with high-manganese and high-silicon type welding flux. It is not sensitive to the rust on the base metal. It has excellent bead molding…

ER70S-3 is a kind of CO2 gas-shielded welding wire. It has excellent welding performance, smooth and beautiful bead and fewer spatters.

Submerged-arc welding has been widely used because it has a series of characteristics like high welding efficiency, steady and reliable welding quality, better labor conditions for workers, etc. It is used or partly used on many…

GB AWS HSCu ERCu HSCuSi ERCuSi-A HsCuSn ERCuSn-A HSCuSn ERCuSn-C HSCuA1 ERCuAl-A1 HSCuA2 ERCuAl-A2 HSCuZn-1 RBCuZn-A HSCuZn-2 RBCuZn-C HSCuZnNi RBCuZn-D HSCuAl-B ERCuAl-A3 HSCuAlNi ERCuNiA1

(1) Under certain parameters, all-position welding is available.(2) High deposition rate. Convenient to adjust alloying constituents.(3) Strong penetration power. Molding will be completed on both sides in one-side welding.(4) Shielding gas is not needed in outdoor…

(1)Under certain parameters, all-position welding is available.(2) High deposition rate. Convenient to adjust alloying constituents.(3) The flux core can change the characteristic of metal transfer so as to decrease spatters and improve the weld molding.(4) Because…

For carbon steel argon-arc welding wires, carrying out the standard GB/T8110-1995. For stainless steel argon-arc welding wires, carrying out the standard YB/T5091-93.