Single Side Driven CNC Flame Cutting Machines

Single Side Driven CNC Flame Cutting Machines

Flame cutting is oxygen cutting in which the appropriate part of the material to be cut is raised to ignition temperature by an oxyfuel gas flame. Also known as oxy-fuel cutting, the process is used for separating and shaping steel components.


1.Cutting method and principle:

Flame cutting is oxygen cutting in which the appropriate part of the material to be cut is raised to ignition temperature by an oxyfuel gas flame. Also known as oxy-fuel cutting, the process is used for separating and shaping steel components.

2.Application of range and usage:

Normally, the flame cutting is recommended to cut more than 5mm carbon steel, because this kind of steel plate has small thermal deformation. Stainless steel and nonferrous metals cannot be used flame cutting, Stainless steel on heated surface oxidized high density layer prevents thermal down, thus affecting the plate fuse; Strong ability to non-ferrous metals such as copper and aluminum heat sink, resulting in cutting surface heat is quickly lost, also affects the plates fusing. Normal cutting can be divided into 5-100mm and 5-300mm, special specification can be customized

3.Machine Technical Parameters:

TypeTrack SpanEffective cutting lengthEffective cutting widthDrive systemTraveling speed
Single side driven2500-4000mmRail length deduct 3000mm1500-3000mmAC servodrive≤6000mm/min

Note: the travelling speed can be customized to 24000mm/min according to customer need.

4.Flame Cutting Parameters:

TypeCutting gasCutting speedCutting Thickness
Single-sided drivenO2/Natural gas/etc.100-750mm/min6mm-300mmm

Note: The special specification can be customized and cutting thickness can be achieved 600mm.