Marine Veneer Reeling Machine

W11NC series marine plate bending machine, it's used to roll the radius for the boat and press the channel shape. It can be designed to different type per customer's requirement. Set the inflexibility beam at the upside of the upper roller. It has set several groups of the support roller between upper rollers and beam, and at the bottom of the lower roller to improve the stiffness of upper roller and lower roller, three rollers are all driving rollers.

There are such types for the marine plate bending machine as follows:

a) Two lower roller separately moveable: Upper roller ascending & descending at vertical direction, lower roller separately mone at horizontal direction.

b) Two lower roller whole moveable: Upper roller ascending at vertical direction, lower whole move at horizontal direction.

c) Symmetrical type: Upper roller ascending & descending at vertical direction, the lowers remain relatively fixed.

Main Parameters

Model	Max. plate thickness(mm)	Plate width(mm)	Main motor power(kw)
W11NC-20x8000	20	8000	45
W11NC-25x12000	25	12000	55
W11NC-30x12000	30	12000	75
W11NC-30x16000	30	16000	110
W11NC-40x18000	40	18000	2x75
W11NC-40x21000	40	21000	2x75