CLZ Marine High-pressure Axial Flow Fan

Application

CLZ marine axial fan is designed primarily for ventilation of cabins, air supply or air exhaust. The delivered air can contain the salt fog or acid vapor from the battery. The temperature of the air can not exceed 50 centigrade degree.

Performance Parameter

No	Type Form	Capacity (m3/h)	Total Pressure (Pa)	Speed (r/min)	shaft power(kw)	Motor		weight (kgs)
						Type	kw
1	CLZ1-Z/CLZ1-J	1600	200	2900	0.142	ZZT2/30-H	0.2	45
						AsH102T2P	0.25	26
2	CLZ2-Z/CLZ2-J	1600	350	2900	0.219	ZZT4/30-H	0.4	52
						A3H-6322T2	0.55	32
3	CLZ3-Z/CLZ3-J	2500	300	2900	0.292	ZZT4/30-H	0.4	58
						A3H-6322T2	0.55	37
4	CLZ4-Z/CLZ4-J	2500	500	2900	0.512	ZZT8/30-H	0.8	78
						Y80L1-2-H	0.75	51
5	CLZ5-Z/CLZ5-J	4000	400	2900	0.63	ZZT8/30-H	0.8	83
						Y80L1-2-H	0.75	53
6	CLZ6-Z/CLZ6-J	4000	700	2900	1.12	ZZT15/30-H	1.5	144
						Y90S-2-H	1.5	77
7	CLZ7-Z/CLZ7-J	6000	750	2900	1.53	ZZT22/30-H	2.2	88
						Y90L-2-H	2.2	84
8	CLZ8-Z/CLZ8-J	9000	800	2900	2.6	ZZT30/15-H	3	182
						Y100L-2-H	3	109
9	CLZ9-Z/CLZ9-J	12000	500	1450	2.1	ZZT30/15-H	3	312
						Y100L2-4-H	3	170
10	CLZ10-Z/CLZ10-J	12000	900	1450	3.8	ZZT55/15-H	5.5	474
						Y132S-4-H	5.5	318
11	CLZ11-Z/CLZ11-J	16000	500	1450	3.3	ZZT40/15-H	4	358
						Y112M-4-H	4	190
12	CLZ12-Z/CLZ12-J	16000	1100	1450	6	ZZT75/15-H	7.5	524
						Y132M-4-H	7.5	348
13	CLZ13-Z/CLZ13-J	25000	600	1450	5.2	ZZT75/15-H	7.5	384
						Y132M-4-H	7.5	244
14	CLZ14-Z/CLZ14-J	25000	1100	1450	10.2	ZZT130/15-H	13	700
						Y160L-4-H	15	459

Structure

CLZ marine axial fan consists of the impeller, casing, motor, guide cowl, rectifier, etc.

1. Casing is made of steel plate with enough thickness, composed of an inner cylinder, a shell and a down-stream guide vane. The shell is with flanges on the inlet and outlet to connect with the ducts. The inner cylinder and the shell are connected with the down-stream guide vane that is used to guide the air flow.

2.Motor is the special motor manufactured by the professional motor factory. It is totally enclosed, naturally cooled and capable of resisting the salty fog, shocking and vibration. The motor is installed inside of the inner cylinder, the electric motor type are ZZT-H marine electric motor (220V) or Y-H marine electric motor (220V/380V)

3.Impeller is made of anticorrosive casting aluminum alloy,being carefully balanced and mounted directly on the motor shaft extension.

4.The guide cowl is installed on the inlet side, the rectifier is installed on the outlet side. So that the air flow vortex is reduced ,and the fan efficiency is increased. The material of GRP.

5.The fan is painted by primer painting and the marine painting.

Photo

Our Certification