Carbon Steel Electrode [Search Related Products]
We can manufacture the Carbon Steel Electrode according to the standard GB/T5117-1995.
CCS, BV,ABS, DNV, NR, GL,LR certirficate is available.
Carbon steel electrodes apply to welding carbon steel and low strength low-alloy steel.
When selecting welding electrodes, one should do according to the requirements of their chemical composition, mechanical properties, crack-resistance performance and, at the same time, analyze comprehensively all kinds of factors like welding structures, steel plate thickness, working conditions, stress status, welder performance, etc. If necessary, do some welding experiments, work out corresponding technical measures, and then decide and select the right kinds of welding electrodes.
|
GB |
AWS |
Type of Coating |
Current |
Main Applications |
|
E4310 |
E6010 |
Titania Type |
AC, DC |
For all position welding general structures,including vertical down welding,especially pipelines.vessels. |
|
E4313 |
E6013 |
Titania Type |
AC, DC |
For welding low-carbon steel structures, especially suitable for welding on thin plates and cosmetic welding which requires the weld beads to be beautiful and glossy. |
|
E4316 |
E6016 |
Titania Type |
AC, DC |
For welding important mild steel and low alloy steel structures. |
|
E4303 |
E6019 |
Titania Type |
AC, DC |
For welding low-carbon steel with normal tensile strength particularily suitable for intermittent welding to sheet and small workpoces. |
|
E4320 |
E6020 |
Ferric Oxide Type |
AC, DC- |
Able to weld key low-carbon structures, such as heavy machinery, construction machinery, etc. |
|
E4324 |
E6024 |
Titania Type |
AC, DC |
Used for downhand welding and flat fillet welding on general low-carbon steel structures. |
|
E5014 |
E7014 |
Titania Type |
AC, DC |
Used for welding carbon steel and low-alloy structures, such as welding on ships, vehicles and machinery structures of 16Mn type. |
|
E5015 |
E7015 |
Low-hydrogen Type |
DC+ |
Used for welding key medium-carbon steel and low-alloy steel structures (under pressure and moving loads), such as 16Mn, 09Mn2Si, 09Mn2V and A, B, D and E steel for ships, etc., and also used for welding on thick plates and hard-to-weld carbon steel structures. |
|
E5015-1 |
E7015-1 |
Low-hydrogen Type |
DC+ |
Used for welding key carbon steel and low-alloy steel structures. |
|
E5016 |
E7016 |
Low-hydrogen Type |
AC, DC+ |
Suitable for welding vertical downward fillet weld of carbon steel and low-alloy steel structures. |
|
E5016-1 |
E7016-1 |
Low-hydrogen Type |
AC, DC+ |
Used for welding key carbon steel and low-alloy steel structures. |
|
E5018 |
E7018 |
Low-hydrogen Type |
AC, DC+ |
Used for welding carbon steel and low-alloy steel structures, such as 16Mn, etc. |
|
E5018-1 |
E7018-1 |
Low-hydrogen Type |
AC, DC+ |
Suitable for welding carbon steel and low-alloy steel structures like offshore oil platforms, ocean going vessels, etc. |
|
E4024 |
E7024 |
Titania Type |
AC, DC |
Used for welding carbon steel and low-alloy structures, such as A, B and D steel, ships, locomotive vehicles, boilers of 16Mn type, etc. |
|
E5028 |
E7028 |
Low-hydrogen Type |
AC, DC+ |
Used for downhand welding and flat fillet welding on carbon steel and low-alloy steel structures, such as 16Mn, 09Mn2Si and A, B, D and E steel for ships, etc. |
|
E4303 |
|
Lime-titania Type |
AC, DC |
Used for welding key low-carbon steel structures and low-alloy structures with low strength, such as Q235, 09MnV, 09Mn2, etc. |
|
E4323 |
|
Lime-titania Type |
AC, DC |
Used for welding key low-carbon steel structures. |
|
E4301 |
|
Titania Ferric Type |
AC, DC |
Used for welding key low-carbon steel structures, such as vehicles, construction structures, heavy machinery structures, etc. |
|
E4311 |
|
Cellulose Type |
AC, DC+ |
Suitable for butt welding, fillet welding and lap welding on thin plates, such as low-carbon steel structures like flues of power stations, air ducts, transformer oil tanks, hulls, exterior panels of cars, etc. |
|
E4316 |
|
Low-hydrogen Type |
AC, DC+ |
Used for welding key low-carbon steel and low-alloy steel structures, such as shipbuilding, bridges, pressure vessels, etc. |
|
E4315 |
|
Low-hydrogen Type |
DC+ |
Used for welding key steel structures under pressure and loads, low-carbon steel thick plate structures and low-alloy steel structures, such as machinery, shipbuilding, bridges, pressure vessels, etc. |
|
E5003 |
|
Lime-titania Type |
AC, DC |
Mainly used for welding 490MPa tensile strength low-alloy steel structures, such as welding on deformed steel bars for construction and other steel of 16Mn type, etc. |
|
E5001 |
|
Titania Ferric Type |
AC, DC |
Suitable for welding low-alloy steel, such as 16Mn, etc. |
|
E5011 |
|
Cellulose Type |
AC, DC+ |
Suitable for vertical downward welding and fillet welding on carbon and low-alloy steel structures, such as 16Mn, 15MnVN, etc. |
